---
title: "set adp"
canonical: "https://docs.infoblox.com/space/nios86/35825261/set%20adp"
format: markdown
---
The **set** **adp** command enables or disables ADP (Advanced DNS Protection) on the supported platform. You can use this command only if **Threat** **Protection** (hardware based) or **Threat** **Protection** **(software** **add-on)** licenses are installed on the platform.

# Syntax

`set adp`

# > Macro (anchor)

Commands for Threat Protection (software add-on):

- `set adp log <level>:` Use this command to set the threat protection log level, where log level is between **0** **(emergency)** and **6** **(info)**. The default value is **6** **(info)**.
- `set adp log <emergency|alert|critical|error|warning|notice|info>:` Use this command to set the threat protection log level.
- `set adp monitor-mode <on|off>:` Use this command to enable or disable the threat protection monitor mode on the respective member. The default value is **off**.

# Syntax

`set adp log <level>`  
` set adp log <emergency|alert|critical|error|warning|notice|info> set adp monitor-mode <on|off>`

# > Macro (anchor)

Commands for Threat Protection (hardware-based):

- `set adp log <level>`: Use this command to set the threat protection log level, where log level is between **0** **(emergency)** and **7** **(debug)**. The default value is **6** **(info)**.
- `set adp log <emergency|alert|critical|error|warning|notice|info|debug>`: Use this command to set the threat protection log level.
- `set adp monitor-mode <on|off>`: Use this command to enable or disable the threat protection monitor mode on the respective member. The default value is **off**.

# Syntax

`set adp log <level>`  
` set adp log <emergency|alert|critical|error|warning|notice|info|debug> set adp monitor-mode <on|off> `