---
title: "Installing Infoblox IPAM Driver for Red Hat Openstack Platform (RHOSP)"
canonical: "https://docs.infoblox.com/space/ipamdriverrhosp/53023977/Installing%20Infoblox%20IPAM%20Driver%20for%20Red%20Hat%20Openstack%20Platform%20(RHOSP)"
format: markdown
---
The Infoblox IPAM adapter for RHOSP should be installed on all the controller nodes that are running your `neutron-server`. The installation consists of the following steps:

1. Configure the Infoblox Grid, as described in the *Configuring a Grid* section in the *[Infoblox NIOS Documentation](https://docs.infoblox.com/)*.
2. Modify neutron.conf and nova.conf, as described in [*<u>Modifying the OpenStack Configuration</u>*](https://infoblox-docs.atlassian.net/wiki/spaces/ipamdriverrhosp/pages/53248204).
3. Install the adapter module on the controller nodes that are running, as described in [*<u>Installing the IPAM Driver</u>*](https://infoblox-docs.atlassian.net/wiki/spaces/ipamdriverrhosp/pages/53122133).
4. Start the Infoblox IPAM Agent on the controller nodes that are running, as described in [*<u>Starting the Infoblox IPAM Agent</u>*](https://infoblox-docs.atlassian.net/wiki/spaces/ipamdriverrhosp/pages/53024048).
5. Create extensible attributes, as described in [*<u>Creating Extensible Attribute Definitions and Network View Associations</u>*](https://infoblox-docs.atlassian.net/wiki/spaces/ipamdriverrhosp/pages/53122154).