---
title: "Pre-Defined Lists for ACM Operation"
canonical: "https://docs.infoblox.com/space/NetMRI753/41945419/Pre-Defined%20Lists%20for%20ACM%20Operation"
format: markdown
---
The Automation Change Manager (ACM) relies on a series of lists in the **Config** **Management** > **Job** **Management** > **Lists** > Macro (anchor)

 page for use in automated jobs. You can edit these lists when necessary. The installed ACM lists consist of the following:

- **ACM** **Allowed** **DHCP** **Servers** – List of any DHCP servers in the enterprise network, that are not to be included in any Rogue DHCP server reports. Defines to NetMRI and to the NIOS system that "these are the established DHCP servers in the network; do not report against these devices." Any router or other device that is not on this list, which offers DHCP-based IP configuration to clients connecting to the network will cause an issue to be fired by the Automation Change Manager.
- **ACM** **BMP** **Device** **Provisioning** – Bare Metal Provisioning list, to identify each switch to be provisioned. New switches are identified by their MAC address, the management IP address, and site settings, including a Site Settings Name which corresponds to a name in the **ACM** **BMP** **Site** **Settings** list. The MAC address is the hardware MAC address assigned to the device coming out of the factory, and which is usually stamped on the rear of the chassis or on the shipping> Macro (anchor)

 box for the device. (This list is used in the topic [*Checklist for Running the Automation Change Manager System*](https://infoblox-docs.atlassian.net/wiki/spaces/NetMRI753/pages/42239516).)
- **ACM** **BMP** **Site** **Settings** – Bare Metal Provisioning list to define the default switch port configuration. Consider it a branch office list–to contain the standardized configuration templates for any new devices installed in a given branch office network. This list defines values such as the Management VLAN ID and its VLAN name, the port designated for management VLAN traffic, the domain name, Syslog and Network Time Protocol server information, and VLANs on the provisioned device to be configured on individual access ports or ranges of access ports (**VLAN1** **Ports** and **VLAN2** **Ports**). (This list is used in the topic [*Checklist for Running the Automation Change Manager System*](https://infoblox-docs.atlassian.net/wiki/spaces/NetMRI753/pages/42239516).)
- **ACM** **BMP** **Switch** **Model** **Interface** **Defs **– Bare Metal Provisioning list defining the interfaces for the device types expected to be provisioned through the job. If the switch model to be provisioned is already in this table, no further information is needed here. The entries follow the standard slot/port designator formats for Cisco and Juniper devices such as Cisco 2950 and 3750 switches and Juniper EX2200 switches. You may need to create your own definitions within this list (or even new lists) to match switch port designators for provisioning other device types. (This list is used in the topic [*Checklist for Running the Automation Change Manager System*](https://infoblox-docs.atlassian.net/wiki/spaces/NetMRI753/pages/42239516).)
- **ACM** **Script** **Settings** – Defines the VLAN to which any rogue DHCP server, detected and isolated on the network, is placed for remedial action. By default, when this task executes, the isolation VLAN is defined as VLAN 99.