---
title: "Viewing NetMRI Setup Information"
canonical: "https://docs.infoblox.com/space/NetMRI733/23461934/Viewing%20NetMRI%20Setup%20Information"
format: markdown
---
# > Macro (anchor)

> Macro (anchor)



At any time, you can check the overall system settings for the current NetMRI appliance. Click the Settings icon and choose the Settings Summary page (**Settings** **–>** **Setup** **–>** **Settings** **Summary**) to get a quick look at many basic aspects of the system–license limits and configuration, basic network configuration, settings for configuration data collection and other functional areas through which NetMRI does its work.

- The **NetMRI** **Configuration** panel shows the NetMRI version, model, serial number and license limit settings.
- The **Network** **Configuration** panel displays the NetMRI network domain settings as configured during step one of the installation process.
- The **MGMT** **Interface** **Configuration** panel displays the configuration settings for the NetMRI management interface.
- The **Device** **and** **Interface** **Counts** panel displays the current number of network devices and interfaces that NetMRI discovers up to the current time through its data collection across the network. Note the **Total** **Interfaces** and **Up** **Interfaces** counters, along with **Frequently Polled** > Macro (anchor)

 interfaces and any possible difference between **Network** **Devices** **Seen** and **Managed** **Network** **Devices**.
- The **Collector** **Settings** panel displays the status of each collector used for gathering information about the networks that NetMRI analyzes and monitors. Some collectors may be disabled if the required license is not installed. (Enable collectors at **Settings** **–>** **Setup** **–>** **Collection** **and** **Groups**.)
- The **Module** **Settings** panel displays the currently NetMRI software version. The possible versions are the following: Switch Port Manager, Automation Change Manager, and full NetMRI.
- The **License** **Configuration** panel identifies the current license information and provides a hyperlink to a page for updating your NetMRI license.

Many of these settings are defined through the Setup Wizard.