--- title: "Network Insight ND-4000 Hardware Components" canonical: "https://docs.infoblox.com/space/IIGFIIPNINP/14516373/Network%20Insight%20ND-4000%20Hardware%20Components" format: markdown --- The Network Insight ND-4000 is a 2-U device discovery platform that you can mount in a standard equipment rack. For information, see *[Installing the](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516377)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516377)*[Infoblox-4010/Network](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516377)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516377)*[Insight](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516377)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516377)*[ND-4000](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516377)*[.](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516377) # > Macro (anchor) Network Insight ND-4000 Front Panel Front panel components are the same as for the Infoblox-4010 Rev-2 platform. It includes the LCD (liquid crystal display) panel and navigation buttons, communication ports, and LEDs, as shown in *[Figure 6](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark14)*. For Network Insight ND-4000 port configuration, see [Table 8](#NetworkInsightND-4000HardwareComponents-bookmark28). For explanations of the Ethernet port LEDs, and console and Ethernet port connector pin assignments, see*[ Infoblox-4010](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark17)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark17)*[Rev-2](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark17)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark17)*[Ethernet](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark17)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark17)*[Port](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark17)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark17)*[LEDs](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark17)* and *[Connector Pin Assignments](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516392/Infoblox-4010+Rev-1#Infoblox-4010Rev-1-bookmark11)*. # > Macro (anchor) Network Insight ND-4000 Rear Panel The Network Insight ND-4000 appliance offers a choice of dual AC power supplies, or dual DC power supplies with or without NEBS-3 compliance. In all cases, power supplies are hot swappable; any single power supply can be replaced without disrupting the operations of the appliance. The Network Insight ND-4000 provides three (3) RJ-45 Gigabit Ethernet interfaces that operate as the MGMT port, LAN1 port and LAN2 port in the Infoblox system. (The HA port is inactive and cannot be used for networking applications.) The three port assignments are from left to right and reflect standard Infoblox port assignments as  shown in *[Figure 9](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark20)* and listed in *[Table](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark23)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark23)*[6](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516383/Infoblox-4010+Rev-2#Infoblox-4010Rev-2-bookmark23)*. *[Figure 12](#NetworkInsightND-4000HardwareComponents-bookmark26)* illustrates the optional ND-4000 system configuration with SFP ports. *Figure 11* *Network Insight* *ND-4000,* *Rear* *View* *with* *RJ-45* *Gigabit* *Ethernet* *Ports* ![image](media://80e0cd1c-d2e9-4fea-9e6f-b17744e68a3b) > Macro (anchor) *Figure 12* *Network Insight* *ND-4000,* *Rear* *View* *with* *SFP* *Interfaces* > Macro (inline-media-image) See the following section *[Network](#NetworkInsightND-4000HardwareComponents-bookmark27)*[ ](#NetworkInsightND-4000HardwareComponents-bookmark27)*[Insight](#NetworkInsightND-4000HardwareComponents-bookmark27)*[ ](#NetworkInsightND-4000HardwareComponents-bookmark27)*[ND-4000 Optical](#NetworkInsightND-4000HardwareComponents-bookmark27)*[ ](#NetworkInsightND-4000HardwareComponents-bookmark27)*[Interfaces](#NetworkInsightND-4000HardwareComponents-bookmark27)* for more details on optical interface configuration. # > Macro (anchor) > Macro (anchor) Network Insight ND-4000 Optical Interfaces Infoblox offers a version of the Network Insight ND-4000 that provides three 1-Gigabit Ethernet (1GbE) interfaces that accept SFP transceiver modules, for 1GbE optical connectivity. Another offered version of the Network Insight  ND-4000 supports three 10-Gigabit Ethernet (10GbE) interfaces that accept SFP+ transceiver modules, for 10GbE optical or copper connectivity. In all cases, Network Insight appliances use the LAN1 and LAN2 ports for connectivity to networks for device discovery, and the MGMT port is reserved for appliance management. In select configurations, Infoblox 1GbE SFP or 10GbE SFP+ ports replace the functionality in the original system MGMT, LAN1, HA and LAN2 ports, thereby disabling the original system MGMT, LAN1, HA and LAN2 ports. 10GbE interfaces accept Infoblox-provided SFP+ 10GbE Short Range and Long Range transceivers, Cisco SFP+ Direct Attach 10GSFP+Cu, or HP HPJ9283B SFP+ Direct Attach 10GSFP+Cu transceivers. You may mix media types in the set of ports (e.g., two copper interfaces and two fiber interfaces). SFP and SFP+ transceivers also may be used in a mixed configuration in the offered 3-Port 10GbE configuration. One possible use case involves installing 10GbE SR SFP+ transceivers in the LAN1 and LAN2 ports for the Infoblox-4010 appliance, and installing 1GbE SFP copper transceivers in the MGMT interface. See the section *[IB-4000/ND-4000](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516240)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516240)*[Series](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516240)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516240)*[Replaceable](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516240)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516240)*[Units](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516240)*, for specific information on part numbers, availability, and device compatibility. *[Table 8](#NetworkInsightND-4000HardwareComponents-bookmark28)* provides more-specific information on each interface on the rear panel of the Network Insight ND-4000. > Macro (anchor) *Table 8* *Rear* *Panel* *Components for the Network Insight ND-4000* | **Component** | **Description** | | --- | --- | | MGMT Port | A port for use with appliance management or DNS service. You can enable the MGMT port and define its use through the Infoblox GUI. | | LAN1 Port | A port that connects a NIOS appliance to the network. You must use the LAN1 port to set up the appliance initially. It handles all traffic if you do not enable the MGMT and LAN2 ports. | | HA Port | Inactive for Network Insight ND-4000 appliances. | | LAN2 Port | A port that connects a NIOS appliance to the network. The LAN2 port is not enabled by default. You can enable the LAN2 port and define its use through the Infoblox GUI after the initial setup. | | Console Port | A male DB-9 serial port for a console connection to change basic configuration settings and view basic system functions through the CLI (command line interface). Only a properly grounded USB-to-Serial dongle is allowed to connect to the serial console port. If the dongle is connected to a laptop, this laptop must be grounded properly as well. Failure to do so may result in damage to the serial console port of the Infoblox appliance. Infoblox is not responsible for such damage. For DB-9 pin assignments, see *[Figure 5](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516392/Infoblox-4010+Rev-1#Infoblox-4010Rev-1-bookmark12)*[.](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516392/Infoblox-4010+Rev-1#Infoblox-4010Rev-1-bookmark12) | | iLO/IPMI Port | Dedicated Ethernet port used for LOM (integrated Lights Out Management) with specific releases of NIOS. Ensure that the IPMI port is properly connected to the network before you configure LOM through the Infoblox GUI for remote management. | | VGA Port | This port is not supported. Use the console port or LAN1 port for initial setup. | | USB Ports | Reserved for future use. | | Power Supplies | Each of the two redundant power supplies has a power outlet for connecting the appliance to a standard DC (Direct Current) or AC power source. | | Power Supply LEDs | Green = Normal
Off = System is off or power supply has failed. | | UID LED | Turns on blue to indicate device that is currently being interacted with in the rack. Turned on by pressing the UID button on the front panel. See *[Table](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516392/Infoblox-4010+Rev-1#Infoblox-4010Rev-1-bookmark5)*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516392/Infoblox-4010+Rev-1#Infoblox-4010Rev-1-bookmark5)*[1](https://infoblox-docs.atlassian.net/wiki/spaces/IIGFIIPNINP/pages/14516392/Infoblox-4010+Rev-1#Infoblox-4010Rev-1-bookmark5)*. | --- **Note**: All Infoblox Ethernet ports are auto-sensing and automatically adjust to standard straight-through and cross-over Ethernet cables. --- # > Macro (anchor) Infoblox-4010 Rev-2/Network Insight ND-4000 System, Environmental, and Power Specifications System specifications describe the physical characteristics of each appliance. Environmental specifications describe the temperature and moisture limits it can withstand. Power specifications describe the electrical range within which the appliance circuitry can operate. ## System Specifications - **Form** **Factor**: 2-U rack-mountable appliance - **Dimensions**: 3.44" H x 17.54" W x 27.5" D (8.75 cm H x 44.55 cm W x 69.85 cm D) - **Weight**: Approximately 61.00 pounds (27.66 kg) - **Ethernet Ports**: MGMT, HA, LAN1, LAN2 – auto-sensing 10Base-T/100Base-TX/1000Base-TX ## Environmental Specifications - Operating Temperature: 50 to 95 degrees F (10 to 35 degrees C) - Storage Temperature: -22 to 140 degrees F (-30 to 60 degrees C) - Operating relative Humidity: 10% to 90% (non-condensing) ## Electrical Power Specifications - DC Power Supply: 48v 750W GRND TERM, RING, VIN 12-10 AWG #10 - Nominal Input Voltage: 48 - Nominal Input Current: 28 - Maximum Rated Input Wattage Rating (Watts): 1350 Maximum - Maximum Rated Volt-Amp: 1350 - Heat Output (BTU/hour): 4610 Maximum - AC Power Supply: 100 to 120V AC, 200 to 240 V AC 750W - Rated Input Frequency: 50 Hz to 60 Hz - Rated Input Current: 10A at 100V AC, 4.9A at 200V AC - Rated Input Power: 930W at 100V AC input, 1348W at 240V AC input - Heat Output (BTU/hour): 3530 at 100V AC input; 4600 at 200V - Maximum Peak Power: 800 W at 100V AC input; 900 W at 120V AC input; 750 W at 200V to 240V AC input