---
title: "Infoblox NIOS CLI"
canonical: "https://docs.infoblox.com/space/IIGF2SA/35768677/Infoblox%20NIOS%20CLI"
format: markdown
---
The NIOS CLI allows you to configure and monitor the appliance using a small set of Infoblox commands. Some tasks, such as resetting the appliance, can be done only through the CLI. You can access the NIOS CLI through a direct console connection from your management system to the Infoblox appliance. (For more information, see *<span style="color: #0000ff">[Console](https://infoblox-docs.atlassian.net/wiki/spaces/IIGF2SA/pages/36834963/Connecting+to+the+Appliance#ConnectingtotheAppliance-bookmark42)</span>*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGF2SA/pages/36834963/Connecting+to+the+Appliance#ConnectingtotheAppliance-bookmark42)*<span style="color: #0000ff">[Port](https://infoblox-docs.atlassian.net/wiki/spaces/IIGF2SA/pages/36834963/Connecting+to+the+Appliance#ConnectingtotheAppliance-bookmark42)</span>*[ ](https://infoblox-docs.atlassian.net/wiki/spaces/IIGF2SA/pages/36834963/Connecting+to+the+Appliance#ConnectingtotheAppliance-bookmark42).) You can also enable remote console SSHv2 (Secure Shell version 2) access through the Infoblox Grid Manager or CLI, and then access the CLI from a remote location using an SSHv2 client. (For more information, refer to the *Infoblox* *NIOS* *Administrator* *Guide*.)

# > Macro (anchor)

Using CLI Help


You can display a list of available CLI commands by typing `help`** **at the command prompt. Example:

`Infoblox > help`

`? Display help`

`delete Delete files`

`dig Perform a DNS lookup and print the results`

`exit Exit command interpreter`

`help Display help`

`ping Send ICMP ECHO`

`quit Exit command interpreter`

`reboot Reboot device`

`reset Reset system settings`

`set Set current system settings`

`show Show current system settings`

`shutdown Shutdown device`

`traceroute Route path diagnostic`

`ddns_add Send DDNS update to add a record`

`ddns_delete Send DDNS update to delete a record`

`rotate Rotate files`

To view an in-depth explanation of a CLI command and its syntax, type `help ``command` after the command prompt. Example:

`Infoblox > help rotate`

`Synopsis:`

`rotate log [ syslog | debug | audit | ifmapserver ]`

`rotate file groupname filename [ filename2, filename3, ...]`

`Description:`

`Rotates the specified log file, up to 10 previous.`

`logfiles will be preserved`

The two main groups of NIOS CLI commands are `set` and `show`. To see the complete list of the `set` commands, enter `help set`** **after the command prompt. Likewise, to see a complete list of the `show` commands, enter` help show`. For information about the CLI commands, refer to the *Infoblox CLI Guide.*