---
title: "Deploying and Using the Application"
canonical: "https://docs.infoblox.com/space/DeploymentGuideSOCInsight2Tenable/767295552/Deploying%20and%20Using%20the%20Application"
format: markdown
---
To enable the Infoblox SOC to Tenable integration, you’ll need both a **destination** and a **traffic flow**. After deploying the integration from the Ecosystem Portal, these components are automatically populated.

**Steps to Deploy the Tenable Integration**

1. **Access the Ecosystem Portal**:  
Log in to the Infoblox CSP.
2. **Navigate to the Integration Marketplace**:
  - Go to **Configure** in the top menu.
  - Click on **Administration**.
3. From the list, select **Integration Marketplace**.
  
4. **Deploy the Integration**:  
You will be redirected to the Infoblox Marketplace. Locate the Tenable integration, and click **Deploy** to add it to your Infoblox portal.

 

  

Once deployed, the integration script will appear in the **Automation** tab of the Data Connector.

 

**Review and Configure the Destination Parameters**:  
Although the destination is automatically created, you’ll need to review and configure specific destination parameters to match your Tenable environment settings. This ensures seamless communication between Infoblox SOC and Tenable.

- On the Infoblox CSP highlight on **Configure, click** on **Administration** and select **Data Connector** from the revealed list

 

![image-20241106-110329.png](media://5da5e727-749d-4ad6-b6fe-feea286e7a6b)

 

 

- On the Data Connector tab, click on the **Automation** tab on the top of the Data Connector Page where you can see the Integration script.
  
  

- Although the destination is automatically created, you’ll need to review and configure specific destination parameters to match your Tenable environment settings.

 

![image-20241126-043343.png](media://55184a8c-fbde-44b2-aa1a-78d9c4b70d54)

 

   

- Edit the **Application Script** for Tenable Integration and configure the desired **Variables** for Authentication and Integration.
  - Variables
    - cspInstance
    - cspApiKey
    - tenableAccessKey
    - tenableSecretKey
    - tenableTemplateName
    - tenableScannerName
      
  - Enable the destination by changing **State** to Enabled.
    
- **Verify the Traffic Flow**:  
The traffic flow is also auto-populated upon deployment. It’s recommended to verify the traffic flow settings to confirm that the data is correctly directed from Infoblox SOC to Tenable.
  
  
  
- **Edit the Traffic Flow**:
  - Go to the **General** tab.
  - Set the **State** to **Enable**.
- **Configure the Source**:
  - Under **Log Source Configuration**, set **Source** to **Infoblox Cloud Source**.
  - Set **Log Type** to **SOC Insights Log**.

 

- **Select the Service Instance**:
  - Expand the **Service Instance** list by clicking on the **Service Instance** header.
  - From the list, select the created **Data Connector** service.
- **Finalize the Setup**:
  - Click **Finish** to confirm the creation of the Traffic Flow.


## Configuring Tenable parameters

1. **To generate tenableAccessKey and tenableSecretKey:**
  1. Log in to Tenable: Go to your Tenable instance and log in with your credentials.
  2. Navigate to API Keys:
    1. Click on your profile icon in the top-right corner.
    2. Select "My Profile" or "API Keys" from the dropdown menu.
  3. Generate API Keys:
    1. Click on "Generate" or "Create API Key".
    2. Note down the Access Key (tenableAccessKey) and Secret Key (tenableSecretKey). Store them securely as the secret key will be shown only once.
      
2. **To find tenableTemplateName:**
  1. Log in to Tenable: Go to your Tenable instance and log in with your credentials.
  2. Navigate to Scans:
    1. Go to the "Scans" tab.
    2. Click on "New Scan".
  3. Select a Template:
    1. Browse through the available templates.
    2. Note down the name of the template you wish to use (e.g., Basic Network Scan).
      
3. **To find tenableScannerName:**
  1. Log in to Tenable: Go to your Tenable instance and log in with your credentials.
  2. Navigate to Scanners:
  3. Go to the "Scans" tab.
  4. Click on "Tools > Manage Sensors" in the sidebar or sub-menu.
  5. Select a Scanner from the available list