---
title: "Deploying and Using the Application"
canonical: "https://docs.infoblox.com/space/DeploymentGuideOrdrAsset2IPAM/767003529/Deploying%20and%20Using%20the%20Application"
format: markdown
---
## Configure the Data Connector

To use the Ordr Systems Infoblox integration a source and destination for the data connector is required. Perform the following steps to configure the Data Connector.

1. On the Infoblox CSP highlight on **Manage, click** on **Data Connector** in the revealed list

![image-20240723-050208.png](media://45c7df66-03d9-43b2-9158-d1eef1c004ff)

 

2. On the Data Connector tab, use BloxOne Cloud Source as the Source Type.

![image-20240723-070030.png](media://dbd9d388-7856-47c1-ba32-48b2c711b3ea)

 

3. On the Data Connector tab, click on the **Destination Configuration** tab on the top of the Data Connector Page.

![image-20240723-070134.png](media://44cd5da3-7b79-40ca-abac-3a8b8bc609e6)

 

4. Create destination configuration based on the following steps.
  1. Enter a **Name** for the configuration.
  2. Select the **Application Script** for Ordr Systems Integration and configure the desired **Variables** for Authentication and Integration.  
**Destination Variables**
    - cspApiKey
    - cspInstance
    - OrdrInstance
    - PassWord
    - UserName
    - ipSpaceName
    - deviceExpirationThreshold

c. Enable the destination by changing **State** to Enabled.  


![image-20240726-115348.png](media://57a50edf-c557-44d1-b50d-72a84658fc92)

 

5. Click on the **Traffic Flow Configuration** tab located near the top of the Data Connector page. Then, click the **Create** button to create a new Traffic Flow configuration.

![image-20240723-071643.png](media://71305a9a-a3ad-4ba2-b6a9-0ff99edbc51e)

 

6. In the **Create Traffic Flow Configuration** screen, the details below are to be filled out.

For Ordr Systems Asset automation it is required to have two traffic flows

1. **Scheduler**:  Triggers based on Cron job
2. **Events**: Triggers based on Events
  **Scheduler Traffic Flow**
  - Enter the **Name** and description of the configuration. Enable the configuration by toggling the **State** to Enabled.
  - Select **Schedule Source** as the Source of Log Source Configuration with desired cron job, it is recommended to configure the cron to run on daily basis.
  - Expand the Destination Configuration list by clicking on the Destination Configuration header. Then, select the destination that was created earlier in this guide from the drop-down list
  - Expand the **Service Instance** list by clicking on the Service Instance header. Then, select the created Data Connector service from the list. Click on **Finish** to confirm the creation of the Traffic Flow.
    
    **Event Traffic Flow**
  - Enter the Name and description of the configuration. Enable the configuration by toggling the State to Enabled.
  - Select BloxOne Cloud Source as the Source of Log Source Configuration and select Audit Log as the Log Type for Source Configuration
    
  - Expand the Destination Configuration list by clicking on the Destination Configuration header. Then, select the destination that was created earlier in this guide from the drop-~~ ~~down list
  - Expand the **Service Instance** list by clicking on the Service Instance header. Then, select the created Data Connector service from the list. Click on **Finish** to confirm the creation of the Traffic Flow.
    

> 📝 Note: It is advisable to first activate the Scheduler Traffic flow and then enable the Event Traffic flow 24 hours later. This sequence allows the Scheduler Traffic to perform a full sync, the duration of which varies based on the dataset size.
> 📝 
> 📝 Furthermore, any modifications to the IPAM IP space or subnet following the activation of traffic flow in this integration could take up to seven days to be reflected.