---
title: "Infoblox Portal Configuration (Event Based)"
canonical: "https://docs.infoblox.com/space/DeploymentGuideIPAMTDwithRapid7/1631846601/Infoblox%20Portal%20Configuration%20(Event%20Based)"
format: markdown
---
### Data Connector Configuration: Event Based Scanning

####  Location:

- Navigate to:  
`Configure > Administration > Data Connector`

#### Steps:

1. Go to the `Destination` tab.
2. Locate the entry named:  
`Infoblox Threat Defense integration for Rapid7_IpamTDevents Destination`
3. Click `Edit` to open the configuration panel.
4. Expand the `Variables` section.
5. Provide appropriate values for the required **destination variables as follows:**  
[Event based Destination Parameters](https://infoblox-docs.atlassian.net/wiki/spaces/DeploymentGuideIPAMTDwithRapid7/pages/1632567463/Event-Based+Scanning+Asset+Enrichment#Configuration-%E2%80%93-Destination-Parameters-(Auto-filled-Keys%2C-User-provided-Values))

### Traffic Flow Configuration

1. **Navigate to:**  
`Configure > Administration > Data Connector`
2. **Traffic Flow Tab:**
  - Click on `Traffic Flow`
  - Locate the entry:  
`Infoblox Threat Defense integration for Rapid7_IpamTDevents`
  - Click `Edit` to open the configuration wizard
3. Within the **Traffic Flow setup**, complete the following sub-sections:

####  a. Log Source Configuration

- **Source:**  
Select `Infoblox Cloud Source`
- **Log Types:**  
Choose relevant log types under **Source Configuration**:
  - Audit Log
  - DDI DHCP Lease Log
  - Threat Defense Threat Feeds Hits Log
  - SOC Insights
- Click `Next` to continue

#### **4. DestinationConfiguration (within Traffic Flow):**

- In the **Destination Configuration** step:
  - Select destination:  
`Infoblox Threat Defense integration for Rapid7_IpamTDevents Destination`
- Click `Next`

**5. Service Instance Selection (within Traffic Flow):**

- Choose the **Service Instance** where the **Data Connector Service** is running and installed for the Rapid7 use case
- Click `Next`

**6. Finalize:**  


![image-20250728-172044.png](media://9d1f8571-15ff-4cb3-8a2e-54ddd0c8b6a3)

- Click `Save and Close` to complete the configuration.