---
title: "CSP Configuration"
canonical: "https://docs.infoblox.com/space/DeploymentGuideCloudforQRadar/662602164/CSP%20Configuration"
format: markdown
---
Follow the steps below in the <u>[Infoblox Cloud Services Portal](https://csp.infoblox.com/atlas/app/welcome)</u> (CSP) to configure the Infoblox Cloud Data Connector (CDC) to send BloxOne data to QRadar. See more information on the CDC <u>[here](https://docs.infoblox.com/space/BloxOneThreatDefense/35472014/Data+Connector)</u>. 

*The CDC is a major feature of BloxOne Threat Defense and as such requires appropriate licensing and deployment. This integration will NOT deploy a CDC. *

1. Navigate to **Manage > Data Connector**.
2. Click the **Destination Configuration** tab at the top.
3. Click **Create > Syslog**.
  1. **Name**: Give the new Destination a meaningful **name**, such as **QRadar-Destination**.
  2. **Description**: Optionally give it a meaningful **description**.
  3. **State**: Set the state to **Enabled**.
  4. **Format**: Set the format to **CEF**.
  5. **FQDN/IP**: Enter the IP address of the QRadar appliance. If using a proxy or other syslog forwarder, enter that IP instead.
  6. **Port**: Leave the port number at **514**.
  7. **Protocol**: Select desired protocol and CA certificate if applicable.
  8. Click **Save & Close**.
4. Click the **Traffic Flow Configuration** tab at the top.
5. Click **Create**.
  1. **Name**: Give the new Traffic Flow a meaningful **name**, such as **QRadar-Flow**.
  2. **Description**: Optionally give it a meaningful **description**.
  3. **State**: Set the state to **Enabled**.
  4. Expand the **Service Instance** section.
    1. **Service Instance**: Select your desired service instance host for which the Data Connector service is enabled.
  5. Expand the **Source Configuration** section.
    1. **Source**: Select **BloxOne Cloud Source**.
    2. Select all desired **log types** you wish to collect. Currently supported log types are:
      1. Threat Defense Query/Response Log
      2. Threat Defense Threat Feeds Hits Log
      3. DDI Query/Response Log
      4. DDI DHCP Lease Log
      5. Audit Log
      6. Service Log
  6. Expand the **Destination Configuration** section.
    1. Select the **Destination** you just created.
  7. Click **Save & Close**.
6. Allow the configuration some time to activate.