Page tree

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1


The appliance can filter an address request by the DHCP fingerprint of a requesting client. Depending on how you apply DHCP fingerprint filters, the appliance can grant or deny the address request if the requesting client matches the filter criteria. Note that only superusers can add, modify, and delete DHCP fingerprint filters. Limited-access users cannot perform any DHCP fingerprint filter related tasks, though with the correct permissions they can apply DHCP fingerprint filters to DHCP ranges and range templates. For information about how to apply filters to DHCP ranges, see Applying Filters to DHCP Objects.
You can define a DHCP fingerprint filter by selecting one or multiple DHCP fingerprints from the existing list of DHCP fingerprints, and then assign a grant or deny permission to the filter. You can then apply the filter to a DHCP address range, if DHCP fingerprint detection is enabled. For information about how to enable DHCP fingerprint detection, see Enabling and Disabling DHCP Fingerprint Detection.
Note that once you apply a DHCP fingerprint filter to an address range, you cannot disable DHCP fingerprint detection or disable individual DHCP fingerprints that have been included in the filter. You must first delete or disable the DHCP fingerprint filter that you have applied to the address range before you can disable any fingerprint related tasks. For information about how to delete a DHCP fingerprint filter, see Deleting Filters.
On lease renewals, requesting clients must send the same DHCP fingerprint information in order for the appliance to properly grant or deny leases based on the configured DHCP fingerprint filters. For example, if a client sends option 55 in the original request but does not send the same information in the renewal request, and you have configured a DHCP fingerprint filter to grant a lease to this client, the appliance may not be able to properly grant a lease to this client.
To apply a DHCP fingerprint filter to an address range:

  1. Define a DHCP fingerprint filter. For information, see Defining DHCP Fingerprint Filters.
  2. Apply the filter to a DHCP address range or range template, and specify that if the DHCP fingerprint of a requesting host matches the filter definition, the appliance either grants or denies the address assignment. For information, see Applying Filters to DHCP Objects.

Defining DHCP Fingerprint Filters

To define a DHCP fingerprint filter:

  1. From the Data Management tab, select the DHCP tab -> IPv4 Filters tab, and then expand the Toolbar and click Add -> IPv4 Fingerprint Filter.
    From any panel in the DHCP tab, expand the Toolbar and click Add -> IPv4 Fingerprint Filter.
  2. In the Add IPv4 Fingerprint Filter wizard, complete the following:
    • Name: Enter a meaningful name for the filter. For example, if you want to filter address requests by a specific device class, you can name one filter "Gaming Console," another "Android Phones," and so on. The filter name must be unique among all DHCP fingerprint filters.
    • Comment: Enter useful information about the filter.
  3. Click Next and then click the Add icon in the Select Fingerprints table. In the Fingerprint Selector dialog box, select the DHCP fingerprint you want to include in this filter. Click Add icon to select another DHCP fingerprint.

Note: When you select No Match, the appliance applies the filter to all requesting clients that do not send option 55 and option 60 or to clients that send values in option 55 and 60 that do not match any existing DHCP fingerprints.

4. Click Next to enter values for required extensible attributes or add optional extensible attributes. For information, see Using Extensible Attributes.

5. Save the configuration.

  • No labels

This page has no comments.