Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

You can create directories on the Grid Master and on Grid members, in which you can store your files. You can manage the directories in the following ways:

Anchor
Adding Directories
Adding Directories
Anchor
bookmark1063
bookmark1063
Adding Directories

To add a directory:

  1. From the Data Management tab, select the File Distribution tab -> Files tab.
  2. Click the parent directory link, and then click Add -> Directory from the Toolbar.
  3. Grid Manager adds a new directory to the parent directory and gives it the default name NewDirectory. You can modify the directory name and permissions, as described in Modifying Directories.

Anchor
Modifying Directories
Modifying Directories
Anchor
bookmark1064
bookmark1064
Modifying Directories

  1. From the Data Management tab, select the File Distribution tab -> Files tab.
  2. Select a directory check box and click the Edit icon.
  3. The Directory editor provides the following tabs from which you can modify data:
    • General: You can modify the directory name here, except for the Root directory.
    • Virtual TFTP Root: You can add an IP Address, a Network or a Range of IP addresses to support VMware ESX hosts who need different PXE boot images based on where they are in the network.
    • Permissions: You can add or delete admin permissions in this tab. For information, see About Administrative Permissions.
  4. Save the configuration and click Restart if it appears at the top of the screen.
    You can also select a directory and click the Delete icon to delete it.

    Note
    titleNote

    When you delete a directory, the appliance automatically removes all its contents in that directory.

Anchor
Creating a Virtual TFTP Root Directory
Creating a Virtual TFTP Root Directory
Anchor
bookmark1065
bookmark1065
Creating a Virtual TFTP Root Directory

This section describes how to create a Virtual TFTP root directory for a specific IP address, network, or range of IP addresses. Note that Virtual TFTP root is supported only for file downloads, but not for file uploads using TFTP client.

Note
titleNote

Root directory can not be a virtual TFTP root.

  1. From the Data Management tab, select the File Distribution tab -> Files tab.
  2. Select the directory check box and click the Edit icon.
  3. Anchor
    bookmark1066
    bookmark1066
    In the Directory editor select Virtual TFTP Root. Click the Add icon and select one of the following:
    • IP Address: This creates a virtual TFTP directory that the clients from a specified IP address will see as the root directory.
    • Network: This creates a virtual TFTP directory that the clients on a specified network will see as the root directory.
    • Range: This creates a virtual TFTP directory that the clients in a specified range of IP addresses will see as the root directory.
  4. From the drop-down in the Member column, select the member on which to make the virtual TFTP root directory.
  5. Anchor
    bookmark1067
    bookmark1067
    In the Address/Network column, enter a value:
    • IP Address: Enter the IP address of the client that will have access to the virtual TFTP root directory. This IP address must be on the allow list in the TFTP access control list.
    • Network: Enter a network address using the format 10.0.0.0/24. This allows all clients in that network to access the virtual TFTP root directory. This network address must be on the allow list in the TFTP access control list.
    • Range: Enter the first IP address in the range Address/Network column, and the last IP address in the range in the End column. This allows all clients in that range to access the virtual TFTP root directory. This range must be on the allow list in the TFTP access control list.
  6. Click Save & Close. Click Restart if it appears at the top of the screen.
  7. To create more virtual TFTP root directories, repeat Steps 3 through 5.

Anchor
Viewing Directories From the Files Tab
Viewing Directories From the Files Tab
Anchor
bookmark1068
bookmark1068
Viewing Directories From the Files Tab

  1. From the Data Management tab, select the File Distribution tab -> Files tab.
  2. Grid Manager displays the following information in the Root directory.
    • Name: The name of the directory or file.
    • Type: Depending on the file type, this can be Directory or File.
    • Size: The file size in B, KB, or MB depending on whether the file size crosses the unit limit or not. For example, if the file size is 1023, Grid Manager displays 1023 B. If the file size is 1025, Grid Manager displays 1 KB. For a directory, Grid Manager displays a dash (-).
    • Date Modified: The timestamp when the directory was last created or when the file was last modified.
  3. Click the directory link to view files and directories in a specific directory. You can also do the following in this panel:
  • Sort the information in ascending or descending order by columns.
  • Use the breadcrumb to go to a specific directory.
  • Use filters and the Go to function to narrow down the list. With the autocomplete feature, you can just enter the first few characters of an object name in the Go to field and select the object from the possible matches.
  • Create a quick filter to save frequently used filter criteria. For information, see Using Quick Filters.
  • Modify some of the data in the table. Double click a row of data, and either edit the data in the field or select an item from a drop-down list. Note that some fields are read-only. For more information about this feature, see Modifying Data in Tables.
  • Print and export the information in this panel.
  • Add a directory or a file. For information, see Adding Directories and Managing Files.
  • Open and edit a directory. For information, see Modifying Directories.