Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

This section describes how to upload files using the Grid Manager or a file transfer client. You can upload files to the Grid Master or to individual members.

Anchor
bookmark1070
bookmark1070
Uploading

...

Files

Some things to keep in mind when you upload files:

...

  1. From the Data Management tab, select Grid File Distribution Properties on the toolbar.
  2. In the Grid File Distribution Properties dialog box, select the Allow Upload to Grid Members check box checkbox.
  3. Click Save & Close.

Anchor
Uploading Files using Grid Manager
Uploading Files using Grid Manager
Anchor
bookmark1074
bookmark1074
Uploading Files using Grid Manager

...

  1. From the Data Management tab, select the File Distribution tab -> Files tab.
  2. Select the destination directory link.
  3. Click the Add icon -> File from the Toolbar.
  4. Anchor
    bookmark1075
    bookmark1075
    Select the Extract files after upload (.zip, .tar, .gz, .tgz) check box checkbox in the Upload dialog box if you are uploading .zip, .tar, .gz, or.tgz files and you want to automatically extract the files upon upload.

    Note
    titleNote

    The directory structure in the compressed file is restored when the files are extracted. A directory that already exists it will be replaced by an extracted directory with the same name.


  5. Click Select to navigate to the file you want to upload.
  6. Anchor
    bookmark1076
    bookmark1076
    Select the file you want to upload, and then click Open.
  7. If you want to upload more than one file, repeat Steps 4 and 6 until you have selected all the files you want to upload. You can upload a maximum of ten files at one time.

    Note
    titleNote

    You can delete an incorrect file selection by clicking the red icon next to the filename before you click Upload


  8. To verify the upload was successful. roll the mouse cursor over the green check mark next to the file name. If the upload was successful, the message "Upload succeeded." appears.

...

You can upload files to the Grid Master or to individual members using a third party FTP client. Files uploaded by file transfer clients to any member, will be synchronized back to Grid Master.
To upload files to a member, you must first enable the Allow Upload to Grid Members check box checkbox in the Grid File Distribution Properties dialog box. See Enabling Upload to Grid Members.
You must add an FTP user before you can upload files using a third party FTP client. This must be an FTP user. It is not the NIOS admin. For information see Adding FTP Users through Grid Manager.

...

  1. From the Data Management tab, select the File Distribution tab -> Files tab.
  2. Grid Manager displays the files and folders in the Root directory. Click the directory link to see the files in a specific directory.
  3. To delete a file, select the check box checkbox and then click the Delete icon.

...

  1. From the Data Management tab, select the File Distribution tab -> Files tab.
  2. Grid Manager displays the files and folders in the Root directory. Click the directory link to see the files in a specific directory.
  3. If "No" appears in the Synchronized with Grid Master column, select the check boxcheckbox, then click the Delete icon.