Page tree


The show snmp command shows information about the SNMP object that you specify. You can enter the SNMP object name or OID. This command is similar to the SNMP "get" operation. You can use the optional v3 command to get the information using SNMPv3. For information about SNMP, see Monitoring with SNMP in the Infoblox NIOS Administrator Guide.
Use the set snmptrap command to send SNMP traps to management systems you specify.


show snmp variable {name of an SNMP variable, in dotted or symbolic format} v3 {snmpuser}

name of an SNMP variableThe name or OID (object ID) of the SNMP object you want to retrieve. For example, you can enter sysName.0 or .
snmpuserThe user name of the SNMPv3 user account. This is optional. If you do not provide a user name, the appliance uses the first SNMPv3 user on the list.


Displaying the host name

Infoblox > show snmp variable sysName.0
SNMPv2-MIB::sysName.0 = STRING:

Displaying the CPU temperature

Infoblox > show snmp variable .
IB-PLATFORMONE-MIB::ibCPUTemperature.0 = STRING: +40.75 C

Displaying the host name using SNMPv3

Infoblox > show snmp variable sysName.0 v3 SNMPv3User1
SNMPv2-MIB::sysName.0 = STRING:

This page has no comments.