Page tree


The set mgm attached command forces a Grid to attach to a Master Grid. Use this command only if a Grid is in the Attached state on the Multi-Grid Manager and Detached on the Grid Manager. This command recovers the Grid status when it is out of sync with the Grid status on the Multi-Grid Manager.


set mgm attached [MGM IP Address] [Port Number]

MGM IP Address IP address of the Master Grid
Port Number Port number of the Master Grid


The following example uses the set mgm attached command.

Console connect [@ Grid IP address]
Infoblox >
set maintenancemode
Maintenance Mode > set mgm attached [MGM IP address] [Port Number]
This command will force the Grid to get attached.
Are you sure you want to continue? (y or n):

This page has no comments.