You can configure notification rules after you have uploaded outbound templates and configured outbound endpoints on the NIOS appliance. For information about adding outbound endpoints, see Configuring Outbound Endpoints. To send outbound notifications from NIOS to the target endpoints, you must configure notification rules. When adding rules, you can select REST API, DXL, or Syslog endpoint and associate the correct action template to the rule. The appliance validates the event type specified in the template with the event type that you select in the notification rule. The parameters defined in a template decides the way NIOS specific data is presented to an endpoint. Each notification rule specifies the target endpoint, notification rule criteria, and the outbound template being used to take action for the matching events.
When you remove all the notification rules associated with an endpoint, all the debug logs for that endpoint will also be removed.
While configuring notification rules, you can decide whether you want to reduce the amount of redundant RPZ hits, ADP hits, and object change discovery data events. Oftentimes, these hits come from the same client IPs, query FQDNs, or networks. To avoid receiving excessive events at the endpoint, you can configure the appliance to remove or deduplicate subsequent events (after sending the first event) within a certain time period. Depending on your configuration, the appliance sends the first event and deduplicates subsequent events that match your filtering criteria within the configured lookback interval. For more information, see Deduplicating Events.
Adding Notification Rules
To add notification rules:
- From the Grid/System tab, select the Ecosystem tab -> Notification tab, and then click the Add icon.
From the Grid/System tab, select the Ecosystem tab, and click Add Notification Rule from the Toolbar.
- In the Add Notification wizard, complete the following.
- Name: Enter the name of the notification rule.
- Target: Click Select Endpoint to select the endpoint type. If there are multiple endpoints, the All Endpoints Selector dialog box is displayed, from which you can select an endpoint name, such as Cisco ISE.
- Target Type: Displays the target type. You cannot change this.
- Comment: Enter useful information about the notification rule.
- Disable: Select this option to disable the notification rule.
- Click Next and complete the following to configure notification rules for the selected endpoint:
- Event: Depending on the licenses you have installed in the Grid, you can select the event types you want to apply to the notification rules. The outbound member collects data for the selected events based on your configuration. Note that if there is a significant amount of data or if the network bandwidth is not sufficient, the outbound member might drop some of the events. In this case, you can access the syslog to view the messages related to dropped events. In addition to basic information (such as timestamp, member IP, network, and others), data collected for some event type might include enriched data such as discovered data, parent network information, and associated extensible attributes.
- The event type you select here affects the templates that are available when you select the RESTful API template you want to use for the outbound notifications. For example, if you select DNSRPZ as the event type, only templates configured for DNS RPZ event type are available for selection.
- For the Cisco ISE endpoint, only the DNS RPZ, Security ADP, DHCP Leases, and ADP events are applicable.
From the drop-down list, select the event types you want to monitor for the notification rules:
- DNS RPZ: Select this to collect data for RPZ events. The DNS RPZ event type is available only if you have installed the RPZ license in the Grid. When you select this event type, you can enable event deduplication in the next step so the appliance can avoid sending excessive events to the endpoint based on your configuration.
- Object Change DNS Record: Select this to collect data for DNS records. That is, if a DNS record is added or updated, the notification rule is triggered and the event is sent to the target endpoint. Dynamic records are not supported.
- Object Change DNS Zone: Select this to collect data for DNS zones. That is, if a zone is created or updated, the notification rule is triggered and the event is sent to the target endpoint.
- DNS Tunneling: Select this to collect data for DNS tunneling events.
- DHCP Leases: Select this to collect data for DHCP leases. Since the same IP addresses might be used by multiple systems, the appliance matches both the IP and the MAC address or the DUID to ensure the discovered data is most likely to be correct.
- DXL Events: Select this to collect data from the topic to which you subscribed when configuring the DXL endpoint. For more information, see Configuring DXL Endpoints.
- IPAM: Select this to send IPAM data. No notification rule is required for this event type. For more information, see Publishing Data.
Security ADP: Select this to collect data for threat protection events. You can specify the maximum domain level for query FQDN for outbound threat protection events. For more information, see Enabling Query FQDN for Outbound Notifications. When you create outbound notifications for security ADP event types, the server collects event statistics every 15 seconds to avoid excessive threat protection events. Note that you can execute test rules in JSON format for Security ADP event types. For more information, see Deduplicating Events.
- Object Change DHCP Fixed Address IPv4, Object Change DHCP Fixed Address IPv6, Object Change Network IPv4, Object Change Network IPv6, Object Change Range IPv4, Object Change Range IPv6, Object Change Host Address IPv4, Object Change Host Address IPv6, Object Change Discovery Data: Select any of these to collect data for database changes in fixed addresses, DHCP ranges, networks and DNS host addresses, and Discovery Data.
Schedule: Select this to schedule the notification rule configuration. You can set up schedules on a hourly, daily, weekly, or on a monthly basis. You can also choose to schedule the event to occur only once. You cannot specify other event types when you select Schedule from the drop-down list. Note that you can execute test rules in JSON format when you schedule the notification rule configuration. You cannot choose an action rule when you schedule the notification rule configuration.
Priority: This field is displayed only if you select Schedule from the drop-down list. Select a priority value, Normal or High, for scheduled events from the drop-down list. When you select Normal, the event is added to the queue soon after the existing events in the list and executed after all events that are already scheduled. Select High if you want the event type to be executed soon after the execution of the current event in the list of events that are scheduled. For information, see Scheduling Tasks.
Action: This field is displayed only if you have selected Cisco ISE as the endpoint (the Target field). Otherwise, this field is hidden.
In the Match the following rule section, select the filters, operators and values from the drop-down lists for the selected event type. You can use the + icon to construct nested expressions for the rule. The filters change depending on what you selected as the event type. Some of the filters are:
- DNS RPZ: Action Policy, Query Name, RPZ Name, RPZ Type, Rule Name, Source IP, BloxOne Threat Defense Cloud Hit Class, BloxOne Threat Defense Cloud Hit Type, Threat Origin
- DNSTunneling: Source IP
- DHCPLeases: DHCP Fingerprint and Lease State.
- DXL Topic: DXL topic that you entered in the Topics field when configuring the DXL endpoint. For more information, see Configuring DXL Endpoints.
- Record Name: Name of the DNS record. For example, AA, CNAME, SRV and so on.
- DNS Records: Supported records are A, AAAA, AAA, CNAME, SRV, ALIAS, NS, PTR, MX, TXT, TLSA, CAA, SOA, DNAME, NAPTR, UNKNOWN.
- Zone Type: Supported zones are Authoritative, Forward, Stub, Delegation, and RPZ.
- User Name: Name entered in the WAPI Integration Username field. For more information, see Configuring Outbound Endpoints.
- IPAM: In the Notify the target section, there are predefined data types in the Available table you can publish. Click Override and use the arrows to move data types from the Available table to the Selected table and vice versa. The appliance sends information for all data types that are added to the Selected table. If you do not override, the publication settings is inherited from those configured while adding the Cisco ISE server. Note that you can configure only one IPAM rule per Cisco ISE server. For mpre information, see Publishing Data.
Security ADP: Rule Message, Hits Count, Member IP, Member Name, Query FQDN, Rule Action, Rule Category, Rule Severity, SID, and Source IP. When you select Member Name, the appliance displays all the ADP members that are available.
- ObjectChangeDHCPFixedAddressIPv4: Disable, IPv4 Address, MAC, Name, Network, Network View, Username, User Group
- ObjectChangeDHCPFixedAddressIPv6: Address Type, Disable, DUID, IPv6 Address, IPv6 Prefix, IPv6 Prefix Bits, Name, Network, Network View, Username, User Group
- DBChangeDHCPNetworkIPv4: Disable, Network, and Network View
- ObjectChangeDHCPNetworkIPv6: Disable, Network, Network View, Username, User Group
- ObjectChangeDHCPRangeIPv4: Disable, Network, Network View, Server Association Type, Username, User Group
- ObjectChangeDHCPRangeIPv6: Address Type, Disable, Network, Network View, Server Association Type, Username, User Group
- ObjectChangeDNSHostAddressIPv4: Host, IPv4 Address, MAC, Network, Network View Association Type, Username, User Group
- ObjectChangeDNSHostAddressIPv6: Address Type, DUID, Host, IPv6 Address, IPv6 Prefix, IPv6 Prefix Bits, Network View, Username, User Group
- Object Change Discovery Data: Discoverer, IP Address, Is IPv4, Operation Type, Unmanaged, Username, User Group
An event may not be triggered and the template may not execute in the following scenarios:
- For events of type Object Change DNS Record:
- Microsoft synchronization of records, DDNS update of records, and nameserver update of records are not supported.
- For SOA records, serial numbers are not automatically incremented.
- For NS records, the Comment field is not updated.
- For an RPZ rule, add and update operations are not supported.
- For a shared record, add and update operations are not supported.
- For events of type Object Change DNS Zone, Microsoft synchronization of zones is not supported.
- Transfer of secondary zones is not supported.
4. Click Next. If you have selected DNS RPZ, or Security ADP or Object Change Discovery Data as the event type, go to Deduplicating Events to configure deduplication. Otherwise, go to Selecting Action Template to select an action template.
Enabling Query FQDN for Outbound Notifications
Infoblox allows you to configure support for query FQDN for outbound threat protection events and choose maximum labels in FQDN that can be configured at the Grid and/or member level. When you enable query FQDN, event data will contain the
query_fqdn field, if any, which is limited by the domain level. The outbound template executes the parameters and fields against the notification criteria to verify if the notification rule works for the selected security ADP event type.
Note that the maximum domain level is set to three and you can query for domain levels up to three. Example: If you set the domain level to two, you can query for domain a.com, but if you query a.b.com, then the outbound template does not execute the details against the notification criteria. When you set the domain level to three, you can query for a.b.com, but if you query for a.b.c.com, then the details are not executed. Query FQDN automatically prefixes a *. at the beginning of the domain name if the FQDN is longer.
You can enable query FQDN through the Grid Security Properties or Member Security Properties editor. A warning message is displayed if the notification rule uses Query FQDN for filtering or deduplication when it is not enabled on each member.
To enable query FQDN for outbound notifications:
- From the Data Management tab, select the Security tab, then click Grid Security Properties from the Toolbar.
From the Data Management tab, select the Security tab -> Members tab -> member check box, and then click the Edit icon.
- In the Grid Security Properties or Member Security Properties editor, click Toggle Advanced Mode, select the Ecosystem tab, and complete the following:
- Enable Query FQDN for Threat Protection Events: Select this check box to enable NIOS to use DNS query FQDNs for Outbound threat protection events in the Grid.
- Max domain level: Select a value from the drop-down list to set the maximum domain level for query FQDNs. You can choose 2 or 3.
This step appears only if you have selected DNS RPZ, or Security ADP, Object Change Discovery Data, or DXL Events as the event type.
Depending on your configuration, the appliance sends the first RPZ, or threat protection, or object change discovery data event and deduplicates subsequent events that match your filtering criteria within the specified lookback interval. The hits are considered based on the following fields for each of these event types:
- RPZ events: Source IP, Query Name, RPZ Policy, and other related fields.
- ADP hits: Source IP, Rule ID, and other corresponding fields.
- Object Change Discovery Data: Discoverer, IP Address, and other fields.
- To avoid excessive notifications received at the endpoint, complete the following to configure event deduplication:
- Enable event deduplication: Select this to enable event deduplication for RPZ, or ADP, or data discovery hits. When you enable deduplication, the appliance suppress redundant notifications based on your configuration.
- Log all dropped events due to deduplication to the syslog: Select this if you want to log all the events that have been dropped due to deduplication. Selecting this allows the appliance to record all the dropped events to the syslog.
- Select the fields to use for deduplication: From the Available table, pick the fields you want to use for filtering the deduplication and move them to the Selected table using the right arrow. You can also deselect any fields by selecting and moving them from the Selected table to the Available table using the left arrow. Event deduplication is done based on the conditions of the selected fields. The following example explains how deduplication works if two RPZ hits occur within the lookback interval, as follows:
RPZ hit 1 /
ADP hit 1 / Data Discovery 1: source_ip: 184.108.40.206, query_name: server1.bad.com, rpz_policy: NXDOMAIN, query_type: qname, network.network_view: internal, network.network: 220.127.116.11/24
RPZ hit 2 /
ADP hit 2 / : source_ip: 18.104.22.168, query_name: www.something.com, rpz_policy: NXDOMAIN, query_type: qname, network.network_view: internal, network.network: 22.214.171.124/24
Data Discovery 2
If you have selected only Source IP for deduplication, the appliance sends only the first RPZ event to the endpoint. If you have selected both Source IP and Query Name, both RPZ events are sent to the endpoint.
- Lookback Interval: Enter the time interval during which the appliance evaluates RPZ hit, or ADP hit, or data discovery events and stops sending redundant events to the endpoint (based on your configuration). At the end of this interval, the appliance resume scanning of the client IP, query FQDN, or network for RPZ events. The minimum interval is five seconds and the maximum is 15 minutes. The default is 10 minutes.
2. Click Next to select an action template for the endpoint, as described in Selecting Action Template.
Selecting Action Template
- In this step, select the outbound template you want to use for outbound notifications. The appliance validates the event type that is added to the notification rule and then matches that with the event type configured in the template.
In the Template field, click Select Template to associate an action template with the notification rule. If there are multiple templates, the <DXL or RESTful API> Template Selector dialog box is displayed, from which you can select an action template. Note that only templates that have the same event type configured for the notification rule appear in this dialog.The following information is displayed about the selected action template:
- Vendor Type: The vendor type associated with the endpoint.
- Template Type: The type of action that will be taken for the matching events.
- Parameters: Displays the associated parameters of the template, such as Name, Value, and Type. You can click the Value cell and modify the value for the parameter.
2. Save the endpoint configuration.
Modifying Notification Rules
To modify a notification rule:
- From the Grid/System tab, select the Ecosystem tab -> Notification tab, click the Action icon next to the notification rule and select Edit from the menu.
- The Notification Rule editor provides the following tabs from which you can modify data:
- General: You can modify the Target and Comment fields.
- Templates: You can select a new action template for the notification rule.
- Save the configuration.
Viewing All Notification Rules
To view the list of notification rules:
- From the Grid/System tab, select the Ecosystem tab, and click the Notification tab.
- Grid Manager displays the following information:
- Name: Name of the notification rule.
- Target: The target name.
- Action: The action type.
- Comment: Comments that were entered for the notification rule.
- Disable: Displays whether the notification rule is disabled.
You can do the following in this tab:
- Click the Action icon
and do the following:
- Edit: Select this to modify the notification rule.
- Delete: Select this to delete a notification rule.
- Test Rule: Select this to execute the parameters and fields of a template against the notification criteria and verify whether the notification rule works for the event (specified in the template). Make changes to the template if required, and you can view this information in the debug log. The test rules go through the following stages: filtering, enrichment, and deduplication.
- View Debug Log: Select this to view debugging messages for the selected notification rule.
- Edit the notification rule information.
- Select the notification rule, and then click the Edit icon.
- Delete a notification rule.
- Select the notification rule, and then click the Delete icon.
- Click the Action icon
When you remove all the notification rules associated with an endpoint, all the debug logs for that endpoint will also be removed.
- Print the list of notification rules.
- Click the Print icon.
- Use filters and the Go to function to narrow down the list. With the autocomplete feature, you can just enter the first few characters of an object name in the Go to field and select the object from the possible matches.
- Create a quick filter to save frequently used filter criteria:
- Print the list of notification rules.
- In the filter section, click Show Filter and define filter criteria for the quick filter.
- Click Save and complete the configuration In the Save Quick Filter dialog box.
The appliance adds the quick filter to the quick filter drop-down list in the panel. Note that global filters are prefixed with [G], local filters with [L], and system filters with [S].
- Sort the notification rules in ascending or descending order by column.
This page has no comments.