Page tree

Contents

You can configure virtual NICs for your NIOS virtual appliance. You can configure settings for up to four discrete virtual interfaces, NIOS requires a minimum of two interfaces to operate in a VM. The four interfaces mirror the MGMT, LAN1, HA, and LAN2 port configurations for hardware NIOS appliances. All the network adapters must be of the same Adapter type. The NIOS virtual instance performs best with the VMXNET 3 network adapter type, but also supports VMXNET 2 adapter type for backwards compatibility. To improve performance and reduce overhead, consider to migrate all the legacy VMXNET 2 network adapter type to VMXNET 3.

  1. From the vSphere Client, select the newly deployed NIOS virtual instance.
  2. Click Inventory -> Virtual Machine -> Edit Settings.
  3. In the Virtual Machine Properties dialog box, select the Hardware tab.
  4. From the Hardware list, select one of the following based on the configuration of your NIOS virtual machine. For a NIOS virtual HA pair, you must configure both the LAN1 and HA ports for the virtual nodes.
    • Network Adapter 1: MGMT
    • Network Adapter 2: LAN1
    • Network Adapter 3: HA
    • Network Adapter 4: LAN2

      Note

      The virtual IP address becomes unreachable during failover, if the MAC Address Changes and Forged Transmits fields are disabled in the security setting of the virtual switch used in HA pairs. To avoid this scenario, you must set both the fields to Accept. By default, both the fields are set to Accept.

  5. For each network adapter, select the network of the NIOS virtual instance from the Network Connection drop-down menu. The list includes all networks configured for virtual machines on the host as shown in the following figure. 
  6. Click OK.


Virtual NIC Configuration

  • No labels

This page has no comments.