Page tree

Contents

You can notify individual administrators about system status through email, or notify a group of people using an alias email address. If you have configured DNS resolution on your network, the E-mail relay configuration function is not required. If you did not configure the settings on the DNS Resolver section, you must enter a static IP address of the target system in the Relay Name/IP Address field. The appliance sends e-mail to administrators when certain events occur. This functionality supports both IPv4 and IPv6 networks. Here is a list of events that trigger e-mail notifications:

  • Changes to link status on ports and online/offline replication status
  • Events that generate traps, except for upgrade failures (ibUpgradeFailure). For a list of events, see Infoblox MIBs

The appliance attempts to send the email notification once after an event. It does not try to send the notification again, if the first attempt fails. Infoblox recommends that you use the Test Email settings button to test the email settings and to verify that the recipient received the notification.
You can define the email settings at the Grid and member levels.
Grid Level
To notify an administrator of an independent appliance or a Grid:

  1. From the Grid tab, select the Grid Manager tab, and then select Grid Properties -> Edit from the Toolbar.
  2. In the Grid Properties editor, select the Email tab, and then complete the following:
    • Enable Email notification: Select this.
      • Email address: Enter the email address of the administrator. Use an email alias to notify multiple people.
    • Use SMTP Relay: Select this if the NIOS appliance must send email to an intermediary SMTP (Simple Mail Transfer Protocol) server that relays it to the SMTP server responsible for the domain name specified in the email address. Some SMTP servers only accept email from certain other SMTP servers and might not allow email from the NIOS appliance. In this case, specify the DNS name or IP address of a different SMTP server that does accept email from the NIOS appliance and that will then relay it to the SMTP server that can deliver it to its destination.
      Clear this if it is unnecessary to use an email relay server.
      • SMTP Relay Name or Address: If you have configured DNS resolution, enter the DNS name of the relay server.
        If DNS resolution is not configured, enter the IP address of the relay server.
  3. Optionally, click Test Email settings to confirm this feature is operating properly.
  4. Save the configuration and click Restart if it appears at the top of the screen.

Member Level
To define email settings for a member:

  1. From the Grid tab, select the Grid Manager tab -> member check box, and then select the Edit icon.
  2. In the Grid Member Properties editor, select the Email tab, and then click Override to override Grid-level settings.
  3. Complete the email configuration as described in Grid Level.
  • No labels

This page has no comments.