Page tree

Contents



  1. From the Data Management tab, select the DNS tab -> Response Policy Zones tab, and then click the Add icon.
  2. When you click the Add icon, either the Add Response Policy Zone Wizard or the Add DNS View wizard is displayed based on the following:
    • When you click the Add icon, the Add Response Policy Zone Wizard is displayed if you have not created additional DNS views and only have the default view.

3. If you have configured multiple DNS views, you must drill-down to the corresponding view to assign a local RPZ. Click the Add icon and the Add Response Policy Zone Wizard is displayed. To create a new DNS view for your local RPZ, click the Add icon and complete the details in the Add DNS View wizard. For information, see Adding a DNSView. For information on modifying an existing view, see Modifying DNS Views.

    • In the Add Response Policy Zone Wizard, select Add Local Response Policy Zone, click Next and specify the following:
    • Name: Enter the name of the local RPZ. It can be a combination of alphanumeric characters. You can enter up to 256 characters.
    • DNS View: The name of the view that you have selected is displayed by default. You can select a view from the drop-down list to associate it with the local RPZ.

Note: The local RPZ must have a primary Grid name server before you can configure it.


    • Policy Override: Select a value from the drop-down list. You can override the policy actions that are specified in the rule level.
      • Log Only (Disabled) – Select this if you want to disable an RPZ rewrite using rules in the RPZ. If the response to the recursive query matches any RPZ rule, then the rule is logged, but the response will not be altered. Note that this option will not override RPZ rules in other RPZ zones, if they take precedence. Select this option to preview the rules in the syslog before they take effect.

Note: When you select this option, the RPZ related reports are not updated, even though there is logging in the syslog.


      • None (Given) – Select this if you want to use the policy from the rule level.
      • Block (No Data) – Select this to send a response that contains no data in it.
      • Block (No Such Domain) – Select this if you want the user to receive a DNS response that indicates there is no domain. All the policy actions in an RPZ are replaced with a NXDOMAIN block.
      • Pass thru – Select this if you want to send an actual response without modification. All the policy actions in an RPZ are replaced with the passthru action.
      • Substitute (Domain Name) – Select this if you want to replace all the policy actions in an RPZ with the specified substitution action.
        • Domain Name: This appears only when you select Substitute (Domain Name) from the Policy Override list. Enter the domain name that you want the client to receive instead of the actual domain name, which is malicious or unauthorized.
    • Severity: Select the threat severity level for the RPZ zone. The threat severity you select here determines the severity for the RPZ zone. Select Critical, Major, Warning, or Informational. The default threat severity level is Major. Note that each of these levels is represented by a number in the syslog (8 being Critical and 4 being Informational). When you upgrade to NIOS 7.0.0, the appliance automatically updates the threat severity level to Informational (displayed as 4 in the syslog) for existing RPZ zones. For information about RPZ syslog messages and severity levels, Viewing RPZ in the Syslog.
    • Comment: Optionally, enter additional information about the local RPZ.
    • Disable: Select the check box to disable a local RPZ without deleting its configuration. Clear the check box to enable the local RPZ. For information, see Enabling and Disabling Zones.
    • Lock: Select the check box to lock the zone so that you can make changes to it and prevent others from making conflicting changes. For information, see Locking and Unlocking RPZs.

4. Click Next to associate the local RPZ with at least one primary name server:

    • Define the name servers for the local RPZ. A Grid name server must be recursive when primary Grid name server is used as an RPZ source. A local RPZ may or may not have a recursive server. For example, there could be a Grid that has only primary Grid name server for a local RPZ to act as an RPZ source for an external set of name servers. A local RPZ must have only one primary Grid name server and it can have one or more secondary Grid name servers. When you select All Recursive Name Servers from the list, all the recursivename servers in the Grid are added as secondary servers for the zone. For information on specifying primary or secondary name servers, see Assigning Zone Authority to Name Servers. For information on specifying name server groups, see About Name Server Groups . For information about all recursive name servers, see Configuring RPZs for All Recursive Servers.

5. Save the configuration and click Next to define extensible attributes. Click Restart if it appears at the top of the screen. For information, see About Extensible Attributes.


Note: You cannot convert a local RPZ to an RPZ feed or vice versa.



  • No labels

This page has no comments.